RussianLDP Рейтинг@Mail.ru
WebMoney: 
WMZ Z294115950220 
WMR R409981405661 
WME E134003968233 
Visa 
4274 3200 2453 6495 

       
Использование /proc для ввода

Пока мы имеем два способа генерировать вывод из модулей: мы можем зарегистрировать драйвер устройства и создать mknod файл устройства, или мы можем создать /proc файл. Это позволяет модулю сообщать нам что-нибудь. Единственная проблема в том, что не имеется никакого пути для нас, чтобы возразить. Первый путем, которым мы пошлем ввод модулям, будет запись обратно в файл в системе /proc.

Поскольку файловая система /proc была написана главным образом, чтобы позволить ядру сообщать ситуацию процессам, нет никаких специальных условий для ввода. Структура proc_dir_entry не включает указатель на функцию ввода. Вместо этого, чтобы писать в /proc, мы должны использовать стандартный механизм файловой системы.   

В Linux имеется стандартный механизм для регистрации файловой системы. Так как каждая файловая система должна иметь собственные функции, чтобы обработать inode и выполнять файлоые операции 4.1, имеется специальная структура, чтобы хранить указатели на все нужные функции, struct inode_operations, который включает указатель на struct file_operations. В /proc всякий раз, когда мы регистрируем новый файл, нам позволяют определить, который struct inode_operations будет использоваться для доступа к этому файлу. Это механизм, который мы используем, struct inode_operations, который включает указатель на struct file_operations, который включает указатели на наши функции module_input и module_output.

Важно обратить внимание что стандартные роли чтения и записи, обращены в ядре. Функции чтения используются для вывода, в то время как функции записи используются для ввода. Причина для этого в том, что чтение и запись относятся к точке зрения пользователя: если процесс читает что-то из ядра, ядро должно вывести это, а если процесс пишет что-то в ядро, оно получает это как ввод.  

Другая интересная точка здесь это функция module_permission. Эта функция вызывается всякий раз, когда процесс пробует делать что-либо с файлами системы /proc, и может решить позволить доступ или нет. Сейчас это только основано на операции и uid текущиего пользователя, но в принципе такое разрешение может выдаваться исходя из других параметров, например, что другие процессы делают с тем же самым файлом, времени дня или последнего ввода, который мы получили.     

Причина для put_user и get_user в том, что память в Linux (под архитектурой Intel, это может быть различно под некоторыми другими процессорами) сегментирована. Это означает, что указатель, отдельно не ссылается на уникальное место в памяти, а только на место в сегменте памяти, и Вы должны знать, который сегмент памяти нужен. Имеется один сегмент памяти для ядра и по одному на каждый из процессов.     

Единственный сегмент памяти, доступный для процесса, это его собственный, так для нормальных программ, нет никакой потребности волноваться относительно сегментов. Когда Вы пишете модуль, обычно Вы хотите обращаться к сегменту памяти ядра, который обрабатывается системой автоматически. Однако, когда содержание буфера памяти должно быть передано между процессом в настоящее время имеющим управление и ядром, функция получает указатель на буфер памяти, который находится в своем сегменте процесса. Макрокоманды put_user и get_user позволяют Вам обращаться к нужной Вам памяти.

procfs.c   


/* procfs.c -  create a "file" in /proc, which allows
 * both input and output. */

/* Copyright (C) 1998-1999 by Ori Pomerantz */

/* The necessary header files */
/* Standard in kernel modules */
#include <linux/kernel.h>   /* We're doing kernel work */
#include <linux/module.h>   /* Specifically, a module */

/* Deal with CONFIG_MODVERSIONS */
#if CONFIG_MODVERSIONS==1
#define MODVERSIONS
#include <linux/modversions.h>
#endif

/* Necessary because we use proc fs */
#include <linux/proc_fs.h>

/* In 2.2.3 /usr/include/linux/version.h includes a
 * macro for this, but 2.0.35 doesn't - so I add it
 * here if necessary. */
#ifndef KERNEL_VERSION
#define KERNEL_VERSION(a,b,c) ((a)*65536+(b)*256+(c))
#endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
#include <asm/uaccess.h>  /* for get_user and put_user */
#endif

/* The module's file functions ********************** */
/* Here we keep the last message received, to prove
 * that we can process our input */
#define MESSAGE_LENGTH 80
static char Message[MESSAGE_LENGTH];

/* Since we use the file operations struct, we can't
 * use the special proc output provisions - we have to
 * use a standard read function, which is this function */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
static ssize_t module_output(
    struct file *file,   /* The file read */
    char *buf, /* The buffer to put data to (in the
                * user segment) */
    size_t len,  /* The length of the buffer */
    loff_t *offset) /* Offset in the file - ignore */
#else
static int module_output(
    struct inode *inode, /* The inode read */
    struct file *file,   /* The file read */
    char *buf, /* The buffer to put data to (in the
                * user segment) */
    int len)  /* The length of the buffer */
#endif
{
  static int finished = 0;
  int i;
  char message[MESSAGE_LENGTH+30];

  /* We return 0 to indicate end of file, that we have
   * no more information. Otherwise, processes will
   * continue to read from us in an endless loop. */
  if (finished) {
     finished = 0;
     return 0;
  }
  /* We use put_user to copy the string from the kernel's
   * memory segment to the memory segment of the process
   * that called us. get_user, BTW, is
   * used for the reverse. */
  sprintf(message, "Last input:%s", Message);
  for(i=0; i<len && message[i]; i++) put_user(message[i], buf+i);

  /* Notice, we assume here that the size of the message
   * is below len, or it will be received cut. In a real
   * life situation, if the size of the message is less
   * than len then we'd return len and on the second call
   * start filling the buffer with the len+1'th byte of
   * the message. */
  finished = 1;
  return i;  /* Return the number of bytes "read" */
}

/* This function receives input from the user when the
 * user writes to the /proc file. */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
static ssize_t module_input(
    struct file *file,   /* The file itself */
    const char *buf,     /* The buffer with input */
    size_t length,       /* The buffer's length */
    loff_t *offset)      /* offset to file - ignore */
#else
static int module_input(
    struct inode *inode, /* The file's inode */
    struct file *file,   /* The file itself */
    const char *buf,     /* The buffer with the input */
    int length)          /* The buffer's length */
#endif
{
  int i;

  /* Put the input into Message, where module_output
   * will later be able to use it */
  for(i=0; i<MESSAGE_LENGTH-1 && i<length; i++)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
    get_user(Message[i], buf+i);
  /* In version 2.2 the semantics of get_user changed,
   * it not longer returns a character, but expects a
   * variable to fill up as its first argument and a
   * user segment pointer to fill it from as the its
   * second.
   *
   * The reason for this change is that the version 2.2
   * get_user can also read an short or an int. The way
   * it knows the type of the variable it should read
   * is by using sizeof, and for that it needs the
   * variable itself.
   */
#else
    Message[i] = get_user(buf+i);
#endif
  Message[i] = '\0';  /* we want a standard, zero terminated string */
  /* We need to return the number of input characters
   * used */
  return i;
}

/* This function decides whether to allow an operation
 * (return zero) or not allow it (return a non-zero
 * which indicates why it is not allowed).
 *
 * The operation can be one of the following values:
 * 0 - Execute (run the "file" - meaningless in our case)
 * 2 - Write (input to the kernel module)
 * 4 - Read (output from the kernel module)
 *
 * This is the real function that checks file
 * permissions. The permissions returned by ls -l are
 * for referece only, and can be overridden here.
 */
static int module_permission(struct inode *inode, int op)
{
  /* We allow everybody to read from our module, but
   * only root (uid 0) may write to it */
  if (op == 4 || (op == 2 && current->euid == 0)) return 0;

  /* If it's anything else, access is denied */
  return -EACCES;
}

/* The file is opened - we don't really care about
 * that, but it does mean we need to increment the
 * module's reference count. */
int module_open(struct inode *inode, struct file *file)
{
  MOD_INC_USE_COUNT;
  return 0;
}

/* The file is closed - again, interesting only because
 * of the reference count. */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
int module_close(struct inode *inode, struct file *file)
#else
void module_close(struct inode *inode, struct file *file)
#endif
{
  MOD_DEC_USE_COUNT;

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
  return 0;  /* success */
#endif
}

/* Structures to register as the /proc file, with
 * pointers to all the relevant functions. ********** */

/* File operations for our proc file. This is where we
 * place pointers to all the functions called when
 * somebody tries to do something to our file. NULL
 * means we don't want to deal with something. */
static struct file_operations File_Ops_4_Our_Proc_File =
  {NULL,  /* lseek */
    module_output,  /* "read" from the file */
    module_input,   /* "write" to the file */
    NULL,  /* readdir */
    NULL,  /* select */
    NULL,  /* ioctl */
    NULL,  /* mmap */
    module_open,    /* Somebody opened the file */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
    NULL,   /* flush, added here in version 2.2 */
#endif
    module_close,    /* Somebody closed the file */
    /* etc. etc. etc. (they are all given in
     * /usr/include/linux/fs.h). Since we don't put
     * anything here, the system will keep the default
     * data, which in Unix is zeros (NULLs when taken as
     * pointers). */
  };

/* Inode operations for our proc file. We need it so
 * we'll have some place to specify the file operations
 * structure we want to use, and the function we use for
 * permissions. It's also possible to specify functions
 * to be called for anything else which could be done to
 * an inode (although we don't bother, we just put
 * NULL). */
static struct inode_operations Inode_Ops_4_Our_Proc_File =
  {&File_Ops_4_Our_Proc_File,
    NULL, /* create */
    NULL, /* lookup */
    NULL, /* link */
    NULL, /* unlink */
    NULL, /* symlink */
    NULL, /* mkdir */
    NULL, /* rmdir */
    NULL, /* mknod */
    NULL, /* rename */
    NULL, /* readlink */
    NULL, /* follow_link */
    NULL, /* readpage */
    NULL, /* writepage */
    NULL, /* bmap */
    NULL, /* truncate */
    module_permission /* check for permissions */
  };

/* Directory entry */
static struct proc_dir_entry Our_Proc_File =
  {0, /* Inode number - ignore, it will be filled by
        * proc_register[_dynamic] */
    7, /* Length of the file name */
    "rw_test", /* The file name */
    S_IFREG | S_IRUGO | S_IWUSR,
    /* File mode - this is a regular file which
     * can be read by its owner, its group, and everybody
     * else. Also, its owner can write to it.
     *
     * Actually, this field is just for reference, it's
     * module_permission that does the actual check. It
     * could use this field, but in our implementation it
     * doesn't, for simplicity. */
    1,  /* Number of links (directories where the
         * file is referenced) */
    0, 0,  /* The uid and gid for the file -
            * we give it to root */
    80, /* The size of the file reported by ls. */
    &Inode_Ops_4_Our_Proc_File,
    /* A pointer to the inode structure for
     * the file, if we need it. In our case we
     * do, because we need a write function. */
    NULL
    /* The read function for the file. Irrelevant,
     * because we put it in the inode structure above */
};

/* Module initialization and cleanup ******************* */
/* Initialize the module - register the proc file */
int init_module()
{
  /* Success if proc_register[_dynamic] is a success,
   * failure otherwise */
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
  /* In version 2.2, proc_register assign a dynamic
   * inode number automatically if it is zero in the
   * structure , so there's no more need for
   * proc_register_dynamic
   */
  return proc_register(&proc_root, &Our_Proc_File);
#else
  return proc_register_dynamic(&proc_root, &Our_Proc_File);
#endif
}

/* Cleanup - unregister our file from /proc */
void cleanup_module()
{
  proc_unregister(&proc_root, Our_Proc_File.low_ino);
}



1999-05-19

Поиск

 

Найди своих коллег!